This logic series adapter allows a surface mount Inverter to DIP-6 conversion. The recommended IC is a Texas Instruments SN74LVC1G06DBVR (IC INVERTER SINGLE 1IN SOT-23-5). However, any 5 pin SOT23-5 Logic Gate with the same pin out will work perfectly.
Top side of board shows silkscreen schematic. Bottom side of PCB has footprints for a SOT23-5 logic IC, an 0805 ceramic decoupling capacitor, and plated through holes for two single row vertical headers. This board uses our through hole male vertical headers, Proto-Advantage part number: HDR100IMP40M-G-V-TH, which are included, unassembled.
Board dimensions: 0.4 x 0.3 x 0.0625 inches (10.16 x 7.62 x 1.6 mm)
PCB construction: FR-4 UL94V-0. PCB operating temperature range: -40C to +130C. PCB reflow maximum temperature: +260C.
Recommended Decoupling Capacitor: Yageo CC0805KRX7R9BB104 (CAP .10UF 50V CERAMIC X7R 0805) or equivalent.
The recommended TI chip can be powered using any voltage from 1.65V to 5.5V. The circular silk screen marking indicates the +ve voltage rail. The triangular silkscreen marking indicates the GND rail.
Datasheets: LS0002 (pdf) SN74LVC1G06DBVR (pdf)