Break away machine pin header, 0.1" pitch, 40 pin, male, gold, right angle, through hole mount, shorter pin version.
Pins are 0.45 mm (18 mils) in diameter.
Although these machine pin headers are technically break away, we recommend cutting them apart using a blade to achieve a smooth edge. A box cutter works well, with the plastic header body supported on the edge of a block of wood.
Machine pins have a smaller diameter that better fits production board through hole footprints, especially for DIP package replacement. We recommend machine pins (0.45mm round) for production adapters.
Machine pins are very strong once soldered, but can be delicate and bend easily when repeatedly plugged in and unplugged from a prototype breadboard or socket. For prototype applications, we recommend using our wire wrap (0.64mm square) pins.
SPECIFICATIONS
Plastic body construction: PA6T plastic (320C melting point)
Pin construction: Gold plated (brass pin, with 1um gold over 50um nickel)
Current Capacity: 3A per pin max.
Operating temperature range: -40C to +130C
Reflow maximum temperature: +260C
Datasheet: MPH-ETD-SHORT (pdf)
|